cancel
Showing results for 
Search instead for 
Did you mean: 

How to bind a Custom FlexView in to Oneview Device View

How to bind a Custom FlexView in to Oneview Device View

_up__bb_
New Contributor III
Hi,
I created my custom FlexView, now I would like to apply this flexview to a specific device,
so I can see the information about these flex on the Device View of the OneView.
How I can set up this binding?

Thanks
Roberto

20 REPLIES 20

Zdeněk_Pala
Extreme Employee
I published the flexview for you at GitHub.

enjoy and share and let me know the feedback!

Be EXTREME!
Regards Zdeněk Pala

Zdeněk_Pala
Extreme Employee
Hi.

I just found this conversation. If you want to bind FlexView with DeviceView, you can get inspiration here: https://github.com/extremenetworks/Netsight-Report-Views/blob/master/DeviceView/README.md

You can have more FlexViews in the same DeviceView also...
Regards Zdeněk Pala

Good morning,
I would like to participate in this discussion..

I need to view the column "Port Alias" in the flex view "LEARNED MAC ADDRESES"

SO I have duplicate the .tpl file and I try to manage the new flexview

but I can only show the column isAlias but this column is not populate


I'm going crazy
can someone help me?

Mike_Thomas
Extreme Employee
This may take some modification of MyDeviceFamilyMenu.xml file to work properly with third party gear.
I would open a ticket with the GTAC and we can look if there is a way to solve this problem.

davidj_cogliane
Contributor
I am experiencing a similar issue. My custom flex few columns display but the data fields do not populate.



Does OneView require the mibs to be in a different folder than Console does?
GTM-P2G8KFN