Extreme Networks

Visconti · 06-03-2019

Hi, In my Netsight console I receive continuously the syslog error message: 127.0.0.1 received short packet ip addr 0.0.0.0 127.0.0.1 received short packet ip addr 0.0.0.0 127.0.0.1 received short packet ip addr 0.0.0.0 127.0.0.1 received short pack...

Visconti · 04-12-2019

Hi, We have a problem with our network.. the routing switch serie B5 enterasys is configured as below: ************************************************************************** #vlan set vlan create 30 set vlan create 31 set vlan create 40 set v...

Visconti · 04-09-2019

You can not understand why a PC (IP 192.168.10.130) of a vlan31 pings another PC (IP 192.168.4.66) of a vlan40 We all have enterasys switches series B5 and extreme networks and in theory there is one of these switches that acts as a routing but if I...

Visconti · 03-08-2019

Hi...I created one group of 16 ports and I have started my flex view to show the amount of time the 16 ports are UP. The result is that I see only 11 ports if I use any other original flexview I see all the 16 ports Can any one help me??

Visconti · 03-06-2019

Hi, In my netsight 8.1.6.20 the Log tab SCHEDULER does not update In fact it is stopped in 14 feb 2019 despite having verified events to be detected such as the backup of the scheduled system every week. does anyone know how to resolve this problem ?

Visconti · 06-03-2019

Netsight console in the syslog tab I suppose the problem is caused by the 3th ethernet card that I have added to my pc Infact if I disable the card the message do not compare in the syslog message tab BUt I need this 3th card so I must resolve th...

Visconti · 04-12-2019

So will you tell me that to segregate the vlan is not enough to set the switch routing configuration as above????? I must to set also the "no ip routing" ?????? Would this explain the ping between the various PCs of various VLANs?

Visconti · 03-06-2019

Yes it'true ! Infact The tab console show the backup starting and hit result Instead if I would verify the updating of scheduler tab ...what event can I simulate?

Visconti · 03-06-2019

In my netsight the backup of switch/device configuration is showed in the inventory tab while the backup of system is showed in scheduler tab

Visconti · 03-06-2019

Yes but the result is the same...I forced a scheduled backup but the windows is stopped at the previeview attached above

Extreme Networks

User Statistics

User Activity

Error received short packet

Inter vlan without configuration

Routing anomalous between VLAN

Flexview that show at most 11 ports

Scheduler do not updated

Re: Error received short packet

Re: Inter vlan without configuration

Re: Scheduler do not updated

Re: Scheduler do not updated

Re: Scheduler do not updated