Hello,
havenāt found any thread with NAC and HP Procurve model A5120 or any 5500-Serie Model.
Procurve is really limited in terms of configuration possibilities. Nevertheless, Iām running into the issue that the switch is not authenticating the connected supplicants.
Once a Host/PC is connected, I canāt observe any Auth-request reaching the NAC Gateway. NAC Gateway it not getting any MAC-Auth requests.
1) Switch can reach the NAC Gateway
2) Switch is declared as Radius Client in NAC and is as well configured with the corresponding Radius-Server and shared-Secret
3) Switch is monitored by the Netsight Console with respective SNM-Parameter
Has anybody successfully couple this HP-Model series with Extreme NAC?
Any configuration example? Iāve actually configured with the HP-configurationguide.
Thanks in advance for any hints.
Regards
Gradelain