cancel
Showing results for 
Search instead for 
Did you mean: 

NAC Request Alarms

NAC Request Alarms

M_Nees
Contributor III
XMC contains 2 threshold alarms regarding to rate of NAC requests:

5a7e41b2374544baae2a12f21c0d1265_d093557f-5839-47cf-870f-81bc426ba061.png



At which level are these threshold set as default ?
Where can i change this threshold values to my special demand ?

Looking inside of these alarms these are just string patterns in "nacappliance event log":

5a7e41b2374544baae2a12f21c0d1265_3d179d74-deb2-4517-883c-8fc3b00fafe6.png



Regards
1 ACCEPTED SOLUTION

M_Nees
Contributor III
Here case answer:

The threshold values are warning 2000/min critical 4000/min Number of requests coming in to NAC from per switch with in a minute, so this is calculated on per switch basis.

The appliance properties to override them are:
warning RADIUS_REQUEST_WARNING_THRESHOLD
critical RADIUS_REQUEST_ALARM_THRESHOLD

Right click on the Engine groups from the Access control tab >> Engine properties and add the needed values accordingly.

Restart of the NAC service is required for this value to take effect.


Regards

View solution in original post

4 REPLIES 4

Drew_C
Valued Contributor III
Thanks for coming back to the thread to share the answer ?

M_Nees
Contributor III
addtional information:

there is no need to restart the XMC services for the changes to take effect, just an enforce should be enough, to restore back the values you can delete the entry and enforce it again, there should not be any other impact in operations due to this change

M_Nees
Contributor III
Here case answer:

The threshold values are warning 2000/min critical 4000/min Number of requests coming in to NAC from per switch with in a minute, so this is calculated on per switch basis.

The appliance properties to override them are:
warning RADIUS_REQUEST_WARNING_THRESHOLD
critical RADIUS_REQUEST_ALARM_THRESHOLD

Right click on the Engine groups from the Access control tab >> Engine properties and add the needed values accordingly.

Restart of the NAC service is required for this value to take effect.


Regards

M_Nees
Contributor III
I have open a GTAC case to clarify.

But it seems i am the first guy who ask this question ...

I get back if i catch the answer.
GTM-P2G8KFN