This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

NAC with 2 different Captive Portals

NAC with 2 different Captive Portals

Go to solution
Claudio_D_Ascen
New Contributor III

‎11-20-2018 08:16 AM

Hi All,

Our hospital customer, needs to configure two differet NAC Captive Portals, one for standard Guest Access with only registration, and other one for particular Guests, that receive an hospital's tablets when in the hospital. For this second type of Guest we need to configure a different Guest Portal that use registration and SMS code. This second type of Guests will have different SSID, Vlan and IP Network respect to the firstone.

Does anyone knows if it's possible configure two different Guest portal configuration on the same NAC gateway?

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
Claudio_D_Ascen
New Contributor III

‎05-30-2019 06:57 AM

Hi resolved using the location based services, like Rodney sed, in that case you have to configure different Unregistered and registered policy for location based services, in my case on differet SSID.

I have configured two different captive portal, one with name, surname and email for Guest Portal and the other one with name surname and phone number, with pass code sent by SMS (for location based services).

Best regards
Claudio

View solution in original post

0 Kudos
6 REPLIES 6

Go to solution
StephanH
Valued Contributor III

‎11-20-2018 01:16 PM

Hello Claudio,

here is a suitable KB article:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-NAC-for-Advanced-Location...

Best regards
Stephan
Regards Stephan
0 Kudos

Go to solution
Rodney_Lacroix
Extreme Employee

‎11-20-2018 12:27 PM

It is absolutely possible. If you are using two different engine groups, each group can have it's own NAC profile and related portal. If you are using a single engine group, you can take advantage of "Location-Based Portals" (only available for full configuration via Java legacy clients at this time - i.e., NAC Manager). You would simply set up a location (ie., SSID = Guest Network) and configure a location-based portal (under "Features" of the nac configuration)
that is specific to that location.
0 Kudos
GTM-P2G8KFN