cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

NAC with 2 different Captive Portals

NAC with 2 different Captive Portals

Claudio_D_Ascen
New Contributor III
Hi All,

Our hospital customer, needs to configure two differet NAC Captive Portals, one for standard Guest Access with only registration, and other one for particular Guests, that receive an hospital's tablets when in the hospital. For this second type of Guest we need to configure a different Guest Portal that use registration and SMS code. This second type of Guests will have different SSID, Vlan and IP Network respect to the firstone.

Does anyone knows if it's possible configure two different Guest portal configuration on the same NAC gateway?

1 ACCEPTED SOLUTION

Claudio_D_Ascen
New Contributor III
Hi resolved using the location based services, like Rodney sed, in that case you have to configure different Unregistered and registered policy for location based services, in my case on differet SSID.

I have configured two different captive portal, one with name, surname and email for Guest Portal and the other one with name surname and phone number, with pass code sent by SMS (for location based services).

Best regards
Claudio

View solution in original post

6 REPLIES 6

StephanH
Valued Contributor III
Hello Claudio,

here is a suitable KB article:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-NAC-for-Advanced-Location...

Best regards
Stephan
Regards Stephan

Rodney_Lacroix
Extreme Employee
It is absolutely possible. If you are using two different engine groups, each group can have it's own NAC profile and related portal. If you are using a single engine group, you can take advantage of "Location-Based Portals" (only available for full configuration via Java legacy clients at this time - i.e., NAC Manager). You would simply set up a location (ie., SSID = Guest Network) and configure a location-based portal (under "Features" of the nac configuration)
that is specific to that location.
GTM-P2G8KFN