Netsight ifValidPackets, value: 0.0 for old un used ports in netsight cant remove alarm.

[Evan_Kuckelheim]

Hello all,

having a very minor issue with my Netsight.

Can't remove old netsight alarms for ports that are no longer used. Collect interface Statistics in console and oneview are disabled for these ports. Port traps are disabled on these ports inside the K series CLI. Not really sure what is causing these specific ports to keep the old configuration for this alarm?

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.3.1

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.1.21

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.14.2

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM

Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 tech23003_second_line

[Evan_Kuckelheim]

Currently on Netsight 7.0.6.27
about to try Netsight 7.1.1.9