Netsight NAC Manager log timestamps

[Mikhail]

When I set time with NTP there is no matter what timezone I set (dateconfig command), the (Console or NAC Manager) log's timestamps do not change their timezone. The time displayed with "date" command and timestamps in logs are in different timezones. No matter what time zone I set up, the logs are written in the same.
"date" command displayed the correct time, which varies with the change of timezone.

If I set the time manually (without using the NTP), everything works correctly.

[Ronald_Dvorak]

Hi Mikhail,

so both are running on VM ?

I think I've run into the same issue and as far as I'd remember it was a problem on the main VM server.
For me it looked like that the main VM server has time priority over the settings of the VMs running on the server.
After some try&error I was able to have it working.

Below my current settings.... could be that someone with more VM experience could give us a better explanation what the issue is.

-Ron

[Ronald_Dvorak]

You'd check the NTP status on the Netsight/NAC with "ntpq -p"
Here my output...