Since upgrading to NetSight 188.8.131.52 we have lost the ability to log our trap events. Prior to the upgrade, the traps were working very well. After the upgrade the only event information shown in the traps window shows "Unable to find events in log file". I have added the users to the snmpd.conf file and restarted the trap service without any change.
When I view the snmptrapd logs, all that is present is the message "Warning: no access control information configured. This receiver will *NOT* accept any incoming notifications." The syslog logs are working fine, but not the traps.
The server is running Windows Server 2008 with SP2, and Java was updated from 6 to 7.
Is there an additional configuration that needs to be applied to get the traps working again?
Try changing to the newer SNMP stack. You can do this from any NetSight client by selecting Tools -> options -> Suite Options -> Advanced SNMP. If the option for Use NetSNMP is not check then please check it. The NetSight server services will need to be restarted after this change. I would also suggest restarting the client(s) as well. See if this helps.
The following tech note should address this issue:
15029: NetSight - Traps not Being Received After Upgrade to version 4.4
Title:NetSight - Traps not Being Received After Upgrade to version 4.4
Products NetSight Console
Changes Upgrade to version 4.4 was performed.
Symptoms Traps are no longer being received in NetSight Traps view.
Cause Code missing to make sure the trap file and the SNMP mode is correct after restoring files on an upgrade.
Solution/Workaround Upgrade to NetSight Suite version 5.0 or higher. Release notes state, in the 'Console Issues Addressed' section:
Resolved an upgrade problem that caused the trap service to not process traps in some cases. 920482
1. Start NetSight Console.
2. Select Tools -> Options -> Suite Options -> Advanced SNMP settings.
3. Check the option to use NetSNMP.
4. Save and restart the server when asked.
Edit the file /NetSight_Install_Path/NetSight/appdata/snmptrapd.conf.
Make sure that the first uncommented line is:
If it is not please add it and then start the SNMP trap service.