Netsight v6.2 & 3rd Party Device Informations

[Dennis_K]

Hi Guys,

we installed Netsight Version 6.2 on Wednesday and all is fine except one thing:

We import the MiB of a Zyxel Switch (GS1920-24HP) and edit the mydevice.properties File so the question Mark is away but Netsight doesn't show the Firmware Version of the Zyxel Switch altough the MiB has this Information.

When i open the MiB tools and jump to Zyxel i can see the Firmware Version. Just Netsight won't show it. The Field is blank.

Any Ideas?

[Murphy__Daniel]

The MIBs import fine.
Using 6.4 development environment the list of Groups/OID names grows from 59,101 to 59,138.
There is 1 new duplicate group so that should not cause any issues.

// Duplicate.
products[zyxel] 1.3.6.1.4.1.890.1 products[apc] 1.3.6.1.4.1.318.1

We do not allow new OIDs to be queried for firmware without code change.
This would be a worth while addition in the future.
Is the firmware in the sysDescr?
Thanks

[Dennis_K]

Hi, attached the MiB File's

ftp://ftp2.zyxel.com/GS1920-24HP/mib_file/GS1920-24HP_4.zip

[Murphy__Daniel]

NetSight uses some predefined rules to extract the firmware revision from sysDescr and it also checks certain OIDs. Possible issues:
1) This device does not follow one of those format.
Please provide exact sysDescr value [xxxxx]
2) MIB Import could have caused a problem

Note: NetSight does not allow you to add your own OIDs for discover.
Perhaps you could provide the MIB?