Hello,We are relatively new to scripting/archive in SE, and would like to have a little bit help on copy downloded device script from github, to our own Site Engine., for laer use in Archive. Need especially help with step number 2 in link below:ht...
HiExtreme IQ Site Engine in Lab network, License Expired.I need to change IP address via CLI because I changed Network ID over Lab enviroment.If I try to change IP address via CLI:ifconfig eth0 IPADDR/MASK and iproute add default via IP GATEWAYPort 8...
Hello.When I open select a device and right click and choose Configure then Ports I'm able to change the port template on the port to Access but it does not get changed on the switch?Rob
I have one switch that fails on archive and compiance checks in Site Engine. The switch in question still works fine, management access, ssh, snmp etc works as it should. Switch model : VSP4900-12MXU-12XEVer: 8.9.0.0Site engine ver: 22.9.13.5 Errorme...
Hi,According to FabricEngine/VOSS release notes, it had been introduced possibility to setup autoSense global data I-SID from XIQ-SE onboarding through ZTP+, as we can see here:But I'm unable to find such possiblity from my 23.4 XIQ-SE instance: what...
