cancel
Showing results for 
Search instead for 
Did you mean: 

Oneview switch connections - switches don't show link when using management port

Oneview switch connections - switches don't show link when using management port

craymond
New Contributor III
When looking at the network map in Oneview - switches don't show the link when using the management port - is there a way to have oneview display those links?
1 REPLY 1

Karthik_Mohando
Extreme Employee
Hi,

The links are detected based on CDP (Exteme, Enterasys, Cabletron Proprietary), EDP, and LLDP.

As far as i know EXOS does not support LLDP or EDP in Management ports

Here is an detailed article on how the links are formed in OneView.
https://gtacknowledge.extremenetworks.com/articles/Q_A/How-do-MAP-views-from-OneView-create-links

In case if you would like to create manual links for management ports it is possible from EMC 8.0
Here is an article on how to create manual links between devices.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-it-possible-to-create-manual-links-between...

I hope this helps!

GTM-P2G8KFN