Top AP information in Extreme Management (Netsight)
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-04-2017 06:10 AM
Hi Community
Perhaps someone can shed some light on the following
In Netsight on the Wireless Management Page it lists the TOP AP's for a specific Date.
If we look at the Peak Wireless Bandwidth vs the Peak Wired Bandwidth.
Surely if we push 230Mbs in on the wireless we should see the same on the Ethernet side? (or close to it)
If we look at the second AP it is 229 Mbs on wireless vs 261 Kbs on wired....
This does not look right unless I am reading it wrong.
Perhaps someone can shed some light on the following
In Netsight on the Wireless Management Page it lists the TOP AP's for a specific Date.
If we look at the Peak Wireless Bandwidth vs the Peak Wired Bandwidth.
Surely if we push 230Mbs in on the wireless we should see the same on the Ethernet side? (or close to it)
If we look at the second AP it is 229 Mbs on wireless vs 261 Kbs on wired....
This does not look right unless I am reading it wrong.
5 REPLIES 5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-04-2017 11:54 AM
At both sites we are running 10.31 on the controllers and 7.1 for netsight. That being said i have some ssid's configured as bridge at ap and other to bridge at controller.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-04-2017 11:39 AM
Ours looks more normal. We are running Netsight 7.0.9.4 with EWC 10.11.05.0005 in a bridged at controller config.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-04-2017 07:13 AM
At another client (Completely different site) I see the same type of reports
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-04-2017 07:11 AM
Hi Nick
No these AP's are connected to a LAN and all the SSID's use either B@AP or B@HWC, no mesh is configured
No these AP's are connected to a LAN and all the SSID's use either B@AP or B@HWC, no mesh is configured
