Hi all. I’m wondering how “AP aware” feature is supposed to work. Is anybody using it and could share how it should be configured and intended to be used? Thanks, Flavio.
i would like to manage a mixed environment consisting of Avaya/Extreme ERS/VSP devices as well as devices from other manufacturers. Application visibility is very impotant. We use Switches from Avaya/Extreme ERS3600, ERS 4800, ERS 4900, VSP4450, from...
I have an RFS4000 controller with 40 access points, the controller is added to the EMC to be monitored, my questions is how to make a heat map in the EMC so that you can see the 40 access points that the RFS4000 controller has added
Hello, we have Summit x460 ( 16.1.3.6 patch1-11) and Netsight 6.3.0.162, we successfully added the x460 to netsight but log shows in switch regarding SNMP ( Login failed through SNMPv3 - wrong digest). we used SNMPv3 default credentials, snmp...
did a deploy. after deploy put in some info, but when filling in the password my keyboard got kinda stuck. So I can’t log in with the default password. How can I reset maybe the installation, or how can I recover the password? I am not a Linux wizar...
