cancel
Showing results for 
Search instead for 
Did you mean: 

Trap messages

Trap messages

Justsomebodi
New Contributor III
Hi All

How does Xos in a stack determine which vlan to use to send trap information? I just assumed it uses the fastest route.
4 REPLIES 4

Justsomebodi
New Contributor III
Can this be set for snmp v3 from within netsight trap configuration screen?

BrandonC
Extreme Employee
Glad to hear you got this worked out.

FYI, if you don't set the source IP as Ron mentioned, EXOS will source the packet from the IP interface that is facing the next hop to the trap receiver.

-Brandon

Justsomebodi
New Contributor III
Thanks, all our traps are set via Netsight, and all traps are sent to our server. Just noticed one of our stacks has started to use a different vlan to send trap info, so netsight missed them.

Ronald_Dvorak
Honored Contributor
You can set the source IP.

From the EXOS command reference guide ...

The following command adds the IP address 10.101.0.105 as a trap receiver with community string blue,and IP address 10.101.0.25 as the source:

# configure snmp add trapreceiver 10.101.0.105 community blue from 10.101.0.25

-Ron

GTM-P2G8KFN