XIQ Site Engine - 3rd party switch backup

[marconet_22]

I have an issue, I have Extreme switch managed by site engine and everything works.

I set profile, cli and snmp connection to manage HP switch but i don't understand how can get backup manually and set weekly backup.

I looking for script in github/Extreme and i found it but i don't understand how can run it on XIQ Site Ingine

[Adam_Minowski]

Right click on the switch you want to backup, then Archives->Inventory settings, and check if you are using correct script
Obviously I just give you example. You may check if the script is good for your purpose. Also you may change the script to different one.

Also please go to:

ExtremeScripting/XMC_XIQ-SE/cfg_backup_scripts at master · extremenetworks/ExtremeScripting · GitHub

And browse for already created scripts. You have also a link to document on how to install those scripts.

• TEMPLATE FILE for creating Device Family Definition files
• How to import this script?
• How to chose what script should be used?

After you have all correctly defined you may manually backup the switch by using right click, then Archives -> Backup configuration. It will then create on demand backup. 
To schedule you need to go to Archives tab, then click button "Create" on the bottom. Go through the wizard and on on step 3 you'd be asked for "Frequency"

[Zdeněk_Pala]

Hi,

How to import the script = https://extreme-networks.my.site.com/ExtrArticleDetail?an=000091050&q=What-directory-do-you-put-cust...

How to select the script to be used = https://emc.extremenetworks.com/content/oneview/docs/network/devices/docs/c_ov_at_firmware_mib_confi...

you need to define CLI credentials and method (SSH/Telnet) for your HP switch

Then you start the backup.

If it does not work, you need to enable debug and check what/where is failing.

Good luck

[randy854]

---

@marconet_22 wrote:

I have an issue, I have Extreme switch managed by site engine and everything works.

I set profile, cli and snmp connection to manage HP switch but i don't understand how can get backup manually and set weekly backup.

I looking for script in github/Extreme and i found it but i don't understand how can run it on XIQ Site Ingine

---

To copy a file from a Unity Catalog (UC) volume to an external location, use the COPY INTO command in Databricks. Define an external location pointing to your target storage (e.g., S3). Use the COPY INTO command to specify the UC volume source and the external location destination. Adjust FILEFORMAT based on your file type. Ensure proper permissions and consider error handling. Refer to Databricks documentation for specific instructions.