cancel
Showing results for 
Search instead for 
Did you mean: 

XMC WebView accessing GUI using https

XMC WebView accessing GUI using https

TobiasW
New Contributor III

Hi,

when I want to open any switch GUI via Network → Devices → WebView, the new tab opens up with a redirect to port 80. All my switches are configured for https access only.
I found this article, where the exact same problem is described:

https://community.extremenetworks.com/extrememanagement-230297/xmc-launch-webview-device-option-7823...

Is this workaround still needed to solve this issue, or is there a more simple way to access the GUI using port 443 with XMC Version 8.3.1?

 

Best Regards and thanks for your answers,

Tobias

4 REPLIES 4

sparkytcc
New Contributor

link no longer works

 

Stefan_K_
Valued Contributor

Here is the link: https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-launch-webview-device-optio...

You can also rightclick the switch -> configure -> change WebView URL to https://%IP%:443

TobiasW
New Contributor III

Hi Marlon,

 

ok, thank you very much for your answer!

 

Regards,
Tobias

Marlon_Scheid
New Contributor III

Hi Tobias,

 

this is still the same behaviour as Zdenek wrote.

 

regards

Marlon

GTM-P2G8KFN