Extreme Networks

TobiasW · 03-08-2021

Hi guys,can anyone help me with manual re-auth for Clients connected on ERS35 or 36?I’m currently migrating NAC off Ignition towards Control, and I don’t really enjoy waiting until the re-auth timer passes and the switch sends an re-auth request to t...

TobiasW · 08-28-2020

Hi togehter,We’re about to change the used Radius from Identity Engines to Control. Therefore, we would like to export the entered MAC Addresses of clients, to have them imported into Control later on.Does anyone know, if there is a chance to do thi...

TobiasW · 07-14-2020

Hi all, After an blackout on saturday, I have a very confusing phenomenon on one of my ERS4850. The Switch has active ISIS Adjacencys, but I cannot ping the Mgmt IP Adress, nor can the Switch ping any device inside the Fabric. The Mgmt VLAN ISID is...

TobiasW · 05-19-2020

Hi guys, has anyone tried to connect an IBM AS400 to an VSP7400 cluster using an SMLT? My customer and I tried this today, and had very strange phenomenons with this setup. Internal, everything was fine, but since the Sophos Firewall couldn’t acc...

TobiasW · 02-20-2020

Hi all, does anyone have an information, when GIM Version 8.4 will be released? I’m looking forward to test the new QR Feature…… Thanks and BR, Tobias

TobiasW · 05-19-2022

Hi oxoyoz, you can use the following commandssho wireless ap on "RF-DOMAIN" -> will display all adopted APs on specific RF-Domainsho wireless client on "AP-HOSTNAME" -> will display all Clients connected to a specific APsho wireless client on "RF-DOM...

TobiasW · 04-01-2021

Thanks for you answer, Mig !

TobiasW · 03-09-2021

Hi Mig, thanks for the reply.Yes, I use the displayed re-auth settings.But I mean something else.The customer has active NAC sessions on his ERS, the active Radius Server is Ignition. The Ports are configured to re-authenticate every 3500 seconds.I a...

TobiasW · 09-03-2020

Blame on me, Mig. I haven’t found the “Export” button in Ignition before……… I was looking in the “Internal Groups” to export the configured devices for these Groups.Thanks for your help!Stay safe,Tobias

TobiasW · 07-17-2020

Hi Mig, yes, you’re right, the ERS is using fabric connect. The ERS Software is 5.12.0.55. Yes, I’ve tried to switch the uplinks, but without any positive effect. I thing I’m going to create an RMA Case in GTAC for exchange of the system. There w...

Extreme Networks

User Statistics

User Activity

ERS 35,36 trigger re-authentication

Export Client MAC Address from Ignition

Mgmt VLAN not accessible, but ISIS established

VSP7400 SMLT to IBM AS400

Guest and IoTManager Release 8.4

RE: CLI to show AP's connected devices' information

Re: ERS 35,36 trigger re-authentication

Re: ERS 35,36 trigger re-authentication

Re: Export Client MAC Address from Ignition

Re: Mgmt VLAN not accessible, but ISIS established