07-20-2020 05:09 PM
I have 3 AP’s
2 x AP650
1 x AP630
flat L2 network
i noticed after updating to the latest version 10.1r6 my devices are failing to get IP’s
going into the logs i think i’ve narrowed it down to my 650’s as the cuplrit. the logs show
DHCP Server Unreachable |
notice how the cuplrits are only kris’s room and OWEN
it’s also evident by the devices themselves (my android for example showing it “couldn’t get IP”
is this a known issues with the AP650’s on the new firmware?
is there a fix at all?
my DHCP server is hosted by my fortigate 60E firewall. all hardwired devices negotiate IP’s just fine, it’s only an issue with my wireless.
Solved! Go to Solution.
07-21-2020 02:37 PM
I would recommend going to 10.0r8a instead of 10.1r6, based off the information in this article: https://extremeportal.force.com/ExtrArticleDetail?n=000050608&q=10.1r6
07-21-2020 03:14 PM
I like to think of it as perfectionism, we’re always improving 😃
07-21-2020 03:11 PM
Sounds like trial and error 🙂
07-21-2020 02:56 PM
The “a” indicates the first change to the r8 revision of the 10.0 firmware. I believe we have a patch coming out tonight that will introduce 10.0r8b, which just adds a second round of a few small changes to the r8 revision branch.
07-21-2020 02:45 PM
Hi Sam,
yeah i ended up rolling back last night.
seemed to fix all of my issues.
out of curiosity, does the “a” mean alpha in 10.0r8a?
or how does the software revision naming scheme go?