hello good day, how can I make the connection to the extremecloudiq cloud for an AP WING 305C?
In this case the network does not use vlan 1 or default, vlan 800 is used with all permissions allowed.
I have already configured the AP in centralized mode, placing the command "cset vlanvid 800"
but still does not connect to the cloud.
The AP was changed to standalone mode, and the vlan 800 interface was configured with dhcp, it was configured in port ge1 as an access vlan and we had the same result, in the same way that interface was configured as a trunk type vlan.
Also in standalone mode, the "operational-mode xiq-cloud force" command is used, the ap restarts and I log in with the default passwords:
admin
admin123
use the following items:How To: How to perform a VLAN probe from CLI on an ExtremeCloud IQ (XIQ) AP? | Extreme Portal
Force |
remove preview |
|
How To: How to perform a VLAN probe from CLI on an ExtremeCloud IQ (XIQ) AP? | Extreme Portal |
int mgt0 dhcp-probe vlan-range vlan-range : Enter the VLAN list to probe. The range is from 1 to 4094. Use a hyphen (-) to separate the beginning and ending IDs of a range of VLAN IDs; for example, 70-100. |
View this on Force > |
|
|
How To: How to switch Universal AP operational modes between HiveOS Cloud (XIQ) and WiNG modes | Ext...
How To: How to Assign a Static IP Address to an Access Point via AP Shell | Extreme Portal
Force |
remove preview |
|
How To: How to Assign a Static IP Address to an Access Point via AP Shell | Extreme Portal |
How to assign a static IP address to an IdentiFi Access Point over the EWC WebGui |
View this on Force > |
|
|
What configuration should the ap have to connect to the XIQ?