05-05-2020 10:16 AM
I recently opened a new support case at extreme networks because of a few interference problems and client connection issues in our network. Finally i was told that there should be a new firmware upgrade for the Extreme Cloud IQ On Premises and apart from that for our networks.
So in our network we are running the following software and versions:
ExtremeCloud IQ Virtual Appliance
Build Id: 2020-03-11-20.23.43
Build Version: 126.96.36.199-NGVA
IQ Engine 10.0r8
So obviously i am not able to find new firmware upgrade software packages for the mentioned software above. I am even not able too find anything here abount the AP 130 .
So actually since the migration from Hivecommunity to extreme portal, the transparency went worse.
Where can i find the respective new firmware upgrades for the AP 130 IQ Engine and especially for the Extreme Cloud IQ On Premises Software?
Solved! Go to Solution.
05-05-2020 10:32 AM
10.0.8.8 would go against the traditional AP OS naming convention, the next version should be 10.0r9 by normal naming standards. Of course they may have changed this, but I’d be surprised!
Downloads can be found here: https://extremeportal.force.com/ExtrSupportHome but as I say the versions that you have are the newest.
05-25-2020 11:22 AM
Hello again tobias.berndes
Im just wondering if you did get access to a new firmware with the bugfix update of Cloud IQ. Im guessing the Cloud IQ update didnt solve your original problem?
I dont see any new firmware being available for AP130. I would be very interested in that since we have over 1000 of them and we are stuck using really old firmware.
05-20-2020 07:31 AM
there is a update available now: https://extremeportal.force.com/ExtrProductDetail?id=01t2T000004typSQAQ
05-19-2020 07:09 AM
Is there any news here? It would be nice with any kind of update.
05-09-2020 03:17 PM
The release has been delayed and didnt get published as planned on the 5th of may. But it should be released shortly for download.