I have a problem with LAG (LACP). When I configure command enable sharing 6 grouping 6-7 lacp on both switches, I have - in column "Agg Mbr". I have tried 3 EXOS images with versions 18.104.22.168, 22.214.171.124 and 126.96.36.199.
I see "link state" as active, "Link up transitions" with numbers but for example column "current master" is empty.
I have added port 6 to vlan Data and port is marked as *6bg.
I have tried version 188.8.131.52 in GNS3 and it is working there. Can somebody help me, why EVE-NG doesn't work? Thank You
I had no issues in my GNS3 lab running 31.7:
System Type: EXOS-VM SysHealth check: Enabled Recovery Mode: All System Watchdog: Enabled Current Time: Wed Nov 23 14:02:30 2022 Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC. Boot Time: Wed Nov 23 14:00:48 2022 Boot Count: 0 Next Reboot: None scheduled System UpTime: 1 minute 42 seconds Current State: OPERATIONAL Image Selected: primary Image Booted: primary Primary ver: 184.108.40.206 Secondary ver: 220.127.116.11 Config Selected: NONE Config Booted: Factory Default Config Automatic: NONE (Disabled) LAA MAC: Locally Administered MAC Address Disabled * EXOS-VM.4 # show sharing Load Sharing Monitor Config Current Agg Min Ld Share Ld Share Agg Link Link Up Master Master Control Active Algorithm Flags Group Mbr State Transitions ================================================================================ 1 1 LACP 1 A 1 Y A 1 2 Y A 1 ================================================================================ enable sharing 1 grouping 1-2 lacp