cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme Control Enfrocement

Extreme Control Enfrocement

Ian_Broadway
New Contributor III

Hi All,

Added a few new switches to Extreme Control.

I enforce after adding and then enforce after the auth/radius tool.

I unable to do the latter at the moment because the first enforce is still “Audit in Progress”

Doesnt give me any info on what the delay is, has to be +20 minutes as of writing this post like this.

There's no cancel option I can see to stop the audit either?

I’ve also restarted both NAC appliances (site only in optional auth/listening mode) but no difference.

Do I need to restart XMC to resolve potentially?

Cant find any info in knowledgebase for it either.

Any thoughts would be helpful

Thanks

Ian

1 ACCEPTED SOLUTION

StephanH
Valued Contributor III

Hello Ian,

 

I do not know of any KB entry. But the easiest way is certainly the one you already mentioned. Restart the XMC service. On the CLI with "service nsserver restart".

Regards Stephan

View solution in original post

2 REPLIES 2

Ian_Broadway
New Contributor III

thanks for the reply, its a windows box but i’ll restart and report.

StephanH
Valued Contributor III

Hello Ian,

 

I do not know of any KB entry. But the easiest way is certainly the one you already mentioned. Restart the XMC service. On the CLI with "service nsserver restart".

Regards Stephan
GTM-P2G8KFN