Legacy or non Extreme APs connecting to a Fabric switch using NAC.

[dparsons]

So I am in the middle of a new deployment and we ran into an issue that I would love to solve. We are running XIQ-SE and NAC. We are setting up new 5420 switches running VOSS 9 and when we tested the APs (AP230s in this case) thing went wrong in several ways. The old setup used a different management VLAN and native VLAN. I fixed that and now I just need to get a good sample of how to send the i-sids to the port with NAC for the AP. We have the AP doing a MAC auth to the switch and it is set to AP aware. Now I just need the settings to put in the NAC. Anyone have some screen shots of a setup that works? I have found lots of how to documents but most are for XOS or not with NAC or some other combination that does not match mine. I know it is something simple but I am new to NAC.

There is a big pow wow planned next week with some engineers to solve this but I really want to have my head wrapped around the solution before then.

Thanks

[Robert_Haynes]

On the support portal if you drill down to Products -> ExtremeCloud -> ExtremeCloud IQ - Site Engine -> Documentation there are two PDF guides that may apply here.

VSP Edge Deployment Guide with ExtremeCloud IQ - Site Engine/NAC Automation

https://documentation.extremenetworks.com/ExtremeCloudIQ/HowTo/VSP_Edge_Deployment_Guide_XIQ-SE.pdf

XIQ-SE and ExtremeControl - VOSS Downloadable ACL Guide

https://documentation.extremenetworks.com/ExtremeCloudIQ/IntegrationGuide/ExtremeCloudIQ-SiteEngine_...

[dparsons]

Thanks for the links but unfortunately like so many other documents these also kinda skim over the topic of WAP and have no screen shots.