ExtremeSwitching (EOS)
Questions and discussions about EOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Login with enrypted password

By mistake, I created an account with an encrypted password. Is there any way to log in using this password? It's hard to connect to the console because the device is in a different region, so i need to log in with ssh.

yongbink by New Contributor
  • 2238 Views
  • 3 replies
  • 0 kudos

WHERE TO FIND MAC OUI LISTINGS USED BY S4's

Syslog LLDP log messages state " unknown OUI's".  Example :  LLDP[1]LLDP unknown OUI 0x7f on port ge.1.28 received from MAC address aa-bb-cc-11-22-33". Is this generated by a lookup to a list of vendor OUI's or is it just the fact that something is w...

Upgrading X460-48t to 5520-48t

Hello All (first post!) - Apologies, but I'm fairly new at this. I inherited a pair of X460s that are going EOSL and we're looking to replace them with a pair of 5520s. The pair is configured as a 'stack' and are the core switches at our datacenter. ...

BrianB by New Contributor
  • 996 Views
  • 0 replies
  • 0 kudos

MSTP with no root bridge consequence

Hi guys,I am about to configure a network of arround 30 switches in MSTP. I will create 1 region with all my vlans for all my switches. I will then elect 2 of my main switches as primary and secondary root.Within that context, my questions are the fo...

WilliamG by New Contributor
  • 835 Views
  • 0 replies
  • 0 kudos
GTM-P2G8KFN