Axel,
A quick way to get the AP up in running is to "force feed" the controller(s) IP.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-controller-s-IP-in-the-AP
John
Sebastian,
Please follow the link below:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-upgrade-an-Access-Point-in-ExtremeC...
Thanks,
John Martineau
Sebastian,
It is your responsibility to upgrade the switches when you are notified that a new firmware is available or you see a unit with the wrong firmware.
You would not want Extreme to randomly upgrade the devices. This could cause a network out...
Firmware Version 8.63.03.0002
September 2018
INTRODUCTION:
This document provides specific information for version 08.63.02.0002 of firmware for the modular chassis and standalone versions of the S-Series including: S180, S140, S155, S150, and S130 c...
Firmware Version 8.63.03.0003
September 2018
6480 Vía Del Oro San Jose, CA 95119
+1 408-579-2800
This document provides specific information for version 08.63.03.0003 of firmware for the S155, S150 and S130 class of S-Series Modules and the S-Series ...
