ExtremeSwitching (EOS) - Page 32 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Cannot Console to S8 via RJ45 COM port

Was working on the Radius configuration for our S8 Switch but misconfigured the access profile tied to our filter-id and can no longer manage the switch via SSH. I am trying to connect via serial cable to the COM RJ45 port but after configuring the r...

Extreme s series vlan interfaces briefly drop

We have had three instances in the last month where a portion or all of our vlan routing interfaces briefly drop within the last month. Opening case with support any troubleshooting ideas welcome.

Configuring Management IP Address on S Series Switch

I'm trying to understand the best practice to configure a management IP address for our s8 Series switch. Currenly I can ssh into it via the management vlan gateway and work on the configuration that way. I'm attempting to configure a true Management...

Resolved! SK8008-1224-F8 fabric module replacement on bonded S4 chassis

Hello everyone, I need to replace faulty SK8008-1224-F8 module on bonded S4 chassis. The module has 4 dedicated VSB ports. Here are my questions: Is there any procedure for such replacement ? Do I have to configure VSB bonding option again in newl...

Vlan Voice

code:Hello,I have three switches, 1 210-24p-GE2, 2 210-48p-GE4 and I need to cascade the 24-port to the 48, but at the time of doing so and connect a phone on the 24-port switch the phones do not receive ip addressing and if I connect a phone to the ...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN