C5 6.81.07.4 IGMP configuration

[Luis_Oliveira]

Dear all,

The firmware version 6.81.07.4 for C5 now includes the command set igmp enable (before only available for the K/S).

This command replaces the following 2 commands required for the old firmware versions ?

set igmpsnooping interfacemode *.*.* enableset igmpsnooping adminmode enable Many thanks for your support

[Mike_D]

Hello Luis,

The vlan enable mode command replaces the interface mode command. IGMP will still need to be globally enabled.

Best regards
Mike