C5-series IGMP SNOOPING -Syslog Message - Firmware 06.81.08.0005

[Helio_Jose_Erha]

Dear all ,

I am getting the following Syslog message.

IGMPSNOOP[256638384]: snooping_timer.c(646) 194947 This is from manager 1 %% snoopMemTimerUpdate: Group membership timer not found

Below c5 settings

#igmp
set igmpsnooping interfacemode ge.1.4 enable
set igmpsnooping interfacemode ge.1.5 enable
set igmpsnooping interfacemode ge.1.6 enable
set igmpsnooping interfacemode ge.1.7 enable
set igmpsnooping interfacemode ge.1.8 enable
set igmpsnooping interfacemode ge.1.9 enable
set igmpsnooping interfacemode ge.1.10 enable
set igmpsnooping interfacemode ge.1.11 enable
set igmpsnooping interfacemode ge.1.21 enable
set igmpsnooping interfacemode ge.1.22 enable
set igmpsnooping interfacemode ge.1.23 enable
set igmpsnooping interfacemode ge.1.24 enable
set igmpsnooping interfacemode ge.2.21 enable
set igmpsnooping interfacemode ge.2.22 enable
set igmpsnooping interfacemode ge.2.23 enable
set igmpsnooping interfacemode ge.2.24 enable
set igmpsnooping interfacemode ge.3.2 enable
set igmpsnooping interfacemode ge.3.21 enable
set igmpsnooping interfacemode ge.3.22 enable
set igmpsnooping interfacemode ge.3.23 enable
set igmpsnooping interfacemode ge.3.24 enable
set igmpsnooping interfacemode lag.0.3 enable
set igmpsnooping interfacemode lag.0.5 enable
set igmpsnooping adminmode enable
!
end

What should I do to resolve this issue?

Thanks

[Helio_Jose_Erha]

OK Daniel. Thank you..

[Daniel_Coughlin]

I got some feedback from engineering.

This message doesn’t necessarily mean there is a problem. Here is the scenario, we receive a membership report packet, during processing we look for the timer associated with group but don’t find it. There are a number of reasons why this can happen.

[Helio_Jose_Erha]

OK. I'm waiting. Thanks...

[Daniel_Coughlin]

Thanks I will have a chat with Engineering and see what I can find out.