ExtremeSwitching (EOS) - Page 24 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

S-Series: Change "Active Management Address" to loopback interface

Hello, we have a S-Series with different ip interfaces. One of them is the “Active Management Address”and this is also an address that forwards traffic from this vlan. Now we have to move this forwarding ip to another system so I think, I have to c...

does the B5 switch pass DSCP packets by default or does it require additional configuration ?

i have a router configured with DSCP tpackets for Voip connected to a B5 switch. the switch is at default configuration ( no vlan) and will be used route voip traffic only to the connected IP phones. is there any configuration required for the switch...

Black Diamond X8 Management Plane Module

Dear All Expert , Good Day. I would like to ask a question as below For X8 Chassis Switch having 2 management module and one of the management module is without OS and another management module is with OS. May I know how to add the OS image to the ...

Matrix N7 Platinum - Access Lists

Hello guys, Can someone tell me if 7G4202-72 devices allow me to deploy ACL’s? When entering the “router mode” I see that the access-list command exists and I can create some rules, however they’re not working as expected. As a small test, I’ve...

mirror a 10Gb port to a 1Gb

Hi guys, I am fairly new to the Extreme networks and any opinion would be highly appreciated. The question is: Is it possible to mirror a 10Gb port to a 1Gb port on a C5 switch? If it is possible, what happens, when the traffic exceeds the 1Gb speed?...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN