C5-series IGMP SNOOPING -Syslog Message - Firmware 06.81.08.0005

[Helio_Jose_Erha]

Dear all ,

I am getting the following Syslog message.

IGMPSNOOP[256638384]: snooping_timer.c(646) 194947 This is from manager 1 %% snoopMemTimerUpdate: Group membership timer not found

Below c5 settings

#igmp
set igmpsnooping interfacemode ge.1.4 enable
set igmpsnooping interfacemode ge.1.5 enable
set igmpsnooping interfacemode ge.1.6 enable
set igmpsnooping interfacemode ge.1.7 enable
set igmpsnooping interfacemode ge.1.8 enable
set igmpsnooping interfacemode ge.1.9 enable
set igmpsnooping interfacemode ge.1.10 enable
set igmpsnooping interfacemode ge.1.11 enable
set igmpsnooping interfacemode ge.1.21 enable
set igmpsnooping interfacemode ge.1.22 enable
set igmpsnooping interfacemode ge.1.23 enable
set igmpsnooping interfacemode ge.1.24 enable
set igmpsnooping interfacemode ge.2.21 enable
set igmpsnooping interfacemode ge.2.22 enable
set igmpsnooping interfacemode ge.2.23 enable
set igmpsnooping interfacemode ge.2.24 enable
set igmpsnooping interfacemode ge.3.2 enable
set igmpsnooping interfacemode ge.3.21 enable
set igmpsnooping interfacemode ge.3.22 enable
set igmpsnooping interfacemode ge.3.23 enable
set igmpsnooping interfacemode ge.3.24 enable
set igmpsnooping interfacemode lag.0.3 enable
set igmpsnooping interfacemode lag.0.5 enable
set igmpsnooping adminmode enable
!
end

What should I do to resolve this issue?

Thanks

[Helio_Jose_Erha]

Hi Daniel,

Yes, the C5 stack is working properly.

Note: This Syslog message is only appearing in Netsight.

Logging configuration:

#logging
set logging application CLIWEB level 5
set logging application SNMP level 5
set logging application STP level 5
set logging application Driver level 5
set logging application System level 5
set logging application Stacking level 5
set logging application RtrOspf level 5
set logging application RtrMcast level 5
set logging application RtrVrrp level 5
set logging application UPN level 5
set logging application Router level 5
set logging application Security level 5
set logging local console enable file enable sfile enable
set logging server 1 ip-addr 10.4.17.24 state enable
!
end

[Daniel_Coughlin]

What is the logging configuration? Other than the message is snooping working properly?

[Helio_Jose_Erha]

Can someone help me? Thank you