cancel
Showing results for 
Search instead for 
Did you mean: 

copper port not getting up between 2 extreme 220 series switches

copper port not getting up between 2 extreme 220 series switches

ddpatil89
New Contributor III

Copper port not getting up between 2 extreme 220 series switches. The copper cable length is around 90 meters. But when we connect both these switches back to back (means at same location) then the port gets up. We tested copper cable via LAN tester it is fine. Please let me know if this is due to large distance between 2 switches or any other reason.

1 ACCEPTED SOLUTION

dpanev
Contributor
5 REPLIES 5

dpanev
Contributor

Try a Cat7 cable

ddpatil89
New Contributor III

No it is not cat7. It is cat6.

dpanev
Contributor

is it a cat7 cable?

ddpatil89
New Contributor III

It is end to end copper connection. There is not fiber or GBIC involved in-between.

GTM-P2G8KFN