K7100 --- QSFP+ connected to Port fg.1.4 (set speed to 10000) and S8 --- 4 x SFP+ connected to tg.5.4, tg.5.5 (Modul5) and tg.4.4, tg.4.5 Modul4) Is this right to connect? Or do I have to use 4 x 10G on one Modul (for example Modul4)? How to co...
On an S-Series chassis we receive the following log messages: RtrArpProc[1]Received ARP packet with Operation code: 3072 All I can find is the RFC stating that 3072 is in the unassigned range.... Does anyone have an idea what that message could me...
Hello everyone! We have two SSA180 Chassis with bonding configured. If we now try to get the hardware status with "show system hardware" command at CLI, we can not see the fan speed of both power supplies in chassis 2. I have changed the power suppl...
Hi, when replacing EOS based access switches (e.g. S-Series) with EXOS based switches with OnePolicy support (e.g. X460-G2 or X440-G2), there is a difference in behavior if a deny all policy is used. On EOS, STP BPDUs are not blocked, but on EXOS th...
Hello, Please have some of you ever experienced this problem on Black Diamond 8810 : Unexpected slot reset while the switch was behaving normally before the failure. This happens from time to time and creates outage for a couple of minutes (restart...
