enterasys s4 webconfig

[Ben_Nussbaum]

Some changes were made to the settings of my enterasys s4 chassis through the webgui config. the changes dont show up in the show config of the cli and i really need to remove them. How do I

[Ben_Nussbaum]

i am perplexed . I have 32 aps that went down after a click by a tech in the webgui and cant figure out why. the cli config looks correct

[Zdeněk_Pala]

There must be a vlan on the port. default is vlan 1 Set port vlan tbp.0.1 1

[Ben_Nussbaum]

i am referring to this
set port vlan tbp.0.1 5
there is no enable on that line. would

clear port vlan tbp.0.1 5

work?

[Zdeněk_Pala]

Use the same command with disable instead of enable.