ExtremeSwitching (EOS) - Page 46 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

40Gbe FAN out DAC Cable with S Series

Hi community We are looking at using the 40Gbe fanout cable with s series 40Gbe blade. The Datasheet for the 40Gbe fanout cable only lists summit switches. Will this cable work with the 40Gbe S series blade? Thx Andre

Configuring per-port traffic shaping on S6

Here is what we try to do:We have an S6 installed in our data center, and we have several customer sites connected to dedicated ports. Most are 1 single uplink ports, some are lags over 2 ports for redundancy.Due to contracts with our customers, the ...

Gbic support on Legacy Enterasys and new Summit switches

Hi Community Perhaps someone can point me in the correct direction. We have a client that have over 500 of the Secure Stack (B5's, C5's and A4's) and S series cores. For the last year they have been installing x440-g2 switches instead of the B5's. ...

How to connect K7100-Series VSB to S8 over 10GB-4-F20-QSFP

K7100 --- QSFP+ connected to Port fg.1.4 (set speed to 10000) and S8 --- 4 x SFP+ connected to tg.5.4, tg.5.5 (Modul5) and tg.4.4, tg.4.5 Modul4) Is this right to connect? Or do I have to use 4 x 10G on one Modul (for example Modul4)? How to co...

Meaning of ARP operation code 3072

On an S-Series chassis we receive the following log messages: RtrArpProc[1]Received ARP packet with Operation code: 3072 All I can find is the RFC stating that 3072 is in the unassigned range.... Does anyone have an idea what that message could me...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN