This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

N7 (7G4280-19) Switch Packet Processing more than 60%

N7 (7G4280-19) Switch Packet Processing more than 60%

Vitor_Barreiro
New Contributor

‎05-12-2016 07:27 PM

I have a network with two N7 (2 x 7G4280-19 blades) in the core and several stacks with secureStacks B and C in the access. Almost all access stacks are connected to the two core boxes (N7). The two core N7 are interconnected with two 10G links in lag.
Multiple servers and other devices are connected to a C3 switch. This switch (C3) also has a uplink for each Core N7. A second C3 also has a uplink for each core N7. In this second C3 are connected the redundant links of the servers.
In a random way I'm having all the networks "down" because the route bridge gets with the "switch Packet Processing more than 60%.

Best Regards
0 Kudos
5 REPLIES 5

Erik_Auerswald
Contributor II

‎05-13-2016 05:54 AM

Switch packet processing means software forwarding. The real question is, why does that happen? A possible cause is unknown unicast flooding because of an NLB-like server load balancing machanism. See the GTAC Knowledge article EOS: How to configure multicast mac to stop flooding of NLB server traffic via slow path.

But of course that is just one possible reason, there are many others.
0 Kudos
GTM-P2G8KFN