cancel
Showing results for 
Search instead for 
Did you mean: 

Reset console password

Reset console password

abechir
New Contributor
Hi community,


I have changed the authentication method to RADIUS, butI haven't completed the configuration of the Radius server so for change it, I need to connect with the console port but I lost my password.

How can I do to reset the console password without losing the configuration in it?


Appreciate the communities help.
4 REPLIES 4

abechir
New Contributor
Thank you for your Help,

I don't have the RW account and I can't access to the admin one.
I tried the reset boutton but it's not change my password to the default one.
So I don't find any solution without losing my configuration .

The problem that I don't have a saved configuration of this Switch.

Drew_C
Valued Contributor III
This topic was posted in the EXOS forum. The C-series doesn't run EXOS, so I'll move it to the EOS group.
Take a look at this post here on the community: https://community.extremenetworks.com/faqs-90303/password-recovery-for-the-securestack-series-5613281

Note that if RADIUS has been configured to regulate management access (5677), the associated passwords on the RADIUS server will override the local passwords. To drop back to local passwords, use the following procedure while there is no connection to the RADIUS server, then log in and disable RADIUS, then continue with whatever recovery is necessary.


Maybe this will help!

abechir
New Contributor
Thank you for your response,

Its an Enterasys C3G124-48 Rev 06.61.15.0003

I tried the ONE TIME FAILSAFE but it's not working.

Drew_C
Valued Contributor III


What EXOS version is your switch running? This might be an option: https://extremeportal.force.com/ExtrArticleDetail?n=000008964
GTM-P2G8KFN