ExtremeSwitching (EOS) - Page 49 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Is the B5K compatable with the 10Gb SFP+ 10GBASE-T(10338) insert?

Is the B5K compatable with the 10Gb SFP+ 10GBASE-T(10338) insert? I looked at the Compatibility Matrix(https://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/?_ga=...) but can't find the B5K listed.

Summit Stack - Daisy chain to ring topologie

Hi community, I just added 2 switches to a existing stack (2 switches). Now my question, when changing the topologie from daisy chain to ring-topology, will there be any interruption of the service?

Spanguard blocked port is not shown on G3G124-24P with FW 06.61.18.0001

Hi, we use more than 25 G3G124-24P switches as edge devices and every system is configured with a complex configuration (MAC- and 802.1X authentication, maclock, lldp and much more) and I'm not sure if I do something wrong or if it's a bug: Therefor...

Are Enterasys GVRP and XOS MVRP compatible?

We used C5 Enterasys Switches (Edge) and S-Series (Core) in our network.To provide VLANs automatically to the switches we are using GVRP. Now we are getting new X450-G2 with XOS. Is it possible that i can connect X450-G2 to the S-Series and let pro...

EoS B2 low performance when NAC active

We are facing really low performance on B2 with : set eapol enable set dot1x enable and a RADIUS/NAC configured The only thing we see it's that CPU usage increases a lot. Do anyone knows if this ist's a know issue, we are running firmware 04.02.1...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN