S8 legacy installed based configuration doubt

[Fernando_Sergio]

Could you please help me identify this customer chassis configuration and why it shows slots numbers higher than 8 if the chassis has only 8 slots?

Chassis Serial Number: 122252xxxxxx

Slot Model Serial # Versions
------ ---------------- -------------------- -------------------------
2 ST4106-0248 121102xxxxxx
5 SK1208-0808-F6 141904xxxxxx
6 SK1208-0808-F6 122354xxxxxx
8 ST4106-0248 100854xxxxxx
10 ST4106-0248 121101xxxxxx
13 SK1208-0808-F6 122252xxxxxx
14 SK1208-0808-F6 122353xxxxxx
16 ST4106-0248 121102xxxxxx
Option Modules:Slot Module Model Serial # Versions
---- ------ ---------------- -------------------- -------------------------
5 1 SOK1208-0104 122200xxxxxx Hw: 8
5 2 SOG1201-0112 114403xxxxxx Hw: 8
13 1 SOK1208-0104 122200xxxxxx Hw: 8
13 2 SOG1201-0112 121153xxxxxx Hw: 8
================================================
(Edited by CM to mask serials)

[Fernando_Sergio]

Hia all, I imagine the chassis is in bounding but I could not find a fabrica module that supports the VSB feature, since customer is using SK1208-0808-F6

[James_A]

If the fabric doesn't have dedicated VSB ports, then it must have the license S-EOS-VSB: S-Series Multi-slot chassis Virtual Switch Bonding License Upgrade, (For use on S130/S150 Class Modules and S140/S180 Class Modules without HW VSB ports)

[Ronald_Dvorak]

Looks like that the customer has 2x S8 chassis bonded together.
You'd run the below command to see all the information....

XYZ(su)->show system hardware brief

CHASSIS 1 HARDWARE INFORMATION
------------------------------

Chassis Type: Bonded S8 Chassis (0x13)
........

[Daniel_Coughlin]

This system is running Chassis Bonding and is comprised of two S8 chasssis with connected with ports converted to bonding ports. This article gives a sample: How to configure Virtual Switch Bonding (VSB) on S-Series or K-Series