cancel
Showing results for 
Search instead for 
Did you mean: 

XOS automatic config save like Enterasys securestack or s-series

XOS automatic config save like Enterasys securestack or s-series

M_Nees
Contributor III
i use recent XOS Firmware V15.7.x and V16.1. every time i change something in the switch config i have to save this. is it possible to use an automatic config save mode like the enterasys switches do?

Regards
7 REPLIES 7

M_Nees
Contributor III
Starting with EXOS 22.2 you can use a periodic config save:

save configuration automatic {every minutes {primary | secondary | existing-config | new-config} | never}Does anybody try that ?!
Any limitations - any negativ side-effects ?

Feedback is welcome.

Andrew_Maldonad
Extreme Employee
Matthias,

UPM profiles can be dynamically triggered on log messages. With cli-config-logging enabled a log message is generated each time a configuration change is made. A UPM profile can be configured in such a way that when the cli-config-logging log message that is generated triggers the UPM profile.

Here is a link that goes into detail regarding the steps to having the UPM profile trigger on a log message (EMS).
http://documentation.extremenetworks.com/exos/EXOS_All/Universal_Port/t_emsevent-configurations.shtm...

-Andrew

M_Nees
Contributor III
Hi Andrew,

thanks for your reply.

Is it possible to trigger the UPM profile every time config change occur ?

Regards
GTM-P2G8KFN