XSR VPN EZIPSEC
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-03-2015 09:13 AM
Hi,
is there an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?
is there an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-04-2015 07:04 PM
Troubleshooting XSR VPN configurations are best pursued through the GTAC Service Case process. I have sent you an email from the service case, please reply to that with the configurations of the routers involved. Best Regards, Raymond
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-04-2015 05:18 AM
Hi,
have tried these configurations - but the Central site router logs:
IKE: IKE 'Mode Config' (dynamic address assignment) is disabled.
TMS: Unable to find local interface for IP 0.0.0.0!
whats the problem?
have tried these configurations - but the Central site router logs:
IKE: IKE 'Mode Config' (dynamic address assignment) is disabled.
TMS: Unable to find local interface for IP 0.0.0.0!
whats the problem?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-03-2015 04:33 PM
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-03-2015 12:29 PM
No problem, I will have one of our XSR Techs take a look at your request....
-Doug
-Doug
Doug Hyde
Director, Technical Support / Extreme Networks
Director, Technical Support / Extreme Networks
