how can we manage an 800-switch (08G20G4-24) - we have forgot the configured IP-address and cannot manage via serial-console (no output on the terminal- maybe the serial port is disabled). how can we set the switch to factory-default (IP: 192.168.10....
Hi,
is there an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?
Thats the really problem: the device still forwarding data traffic fine - but we cannot reach via console (CPU-LED does´nt lit) and have forgot the IP-address...
yes - I have tried with the same cable that works on another 800 Switch (and on any DFE-modules) - I have tried also different baud-rates (1200 - 115200)
Hi,
have tried these configurations - but the Central site router logs:
IKE: IKE 'Mode Config' (dynamic address assignment) is disabled.
TMS: Unable to find local interface for IP 0.0.0.0!
whats the problem?
Hi,
sorry - this does´nt help because your article is for "Static IP addresses on all WAN ports".
we need an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private ...
