Extreme Networks

infra_it · ‎04-24-2019

Hello,

We have in our network ERS-4850GTS-PWR+ with version 5.12.1.027. I have tested the new version 5.12.2.011 and after reboot the switch comes up without any configuration (factory default settings).
I have tested 2 switches, not only 1.
Could you help me please with this issue?
Thank you.

Pearce_Hamblin · ‎01-30-2020

@infra_it , did you ever get to the bottom of the cause of this and get a resolution?

WindyMiller · ‎01-30-2020

Solution in Knowledge base search for article No: 000035987 this has worked for us.

infra_it · ‎04-27-2019

Hello,

I have tested new version (5.12.3.011) but it`s the same issue. After upgrade, switch comes up without configuration.

WindyMiller · ‎04-26-2019

We've had this issue and Extreme have said :-

The above bug is fixed in https://tel:5.12.3 release which should be posted to the support portal within a few days (hopefully by end of April).
However, there is a workaround in place which involves using telnet to perform the upgrade.