06-16-2021 11:44 PM
Hello all. Well I goofed up in uploading a config to the GTS4950 and now I cannot log back in via the console port. Something broke (that is, was configured wrong) when the Console access user name and password were entered.
I have tried using the CTRL-C option, but do not see anything in there that would allow me to factory reset the switch and start over. I had the thing in a stack of 4 switches too. Our resident Extreme expert will be back in the office in the morning, but I was hoping to get this fixed before then. All I want to do is just factory reset the switch so I can get the configuration put in. Can anyone instruct me on how this might be done?
Solved! Go to Solution.
06-17-2021 12:23 AM
Correct. So are you not able to login using the default creds?
User=RW | Password=securepasswd / User=RO | Password=userpasswd
OR
User=RW | Password=secure / User=RO | Password=user
06-18-2021 12:56 AM
Great
06-17-2021 10:32 PM
06-17-2021 12:56 AM
When I spoke of the configuration file, I should have said the configuration I was trying to upload to the switch, but I get what you are saying. I will try the defaults and see if that does the trick.
06-17-2021 12:41 AM
The configuration file does not carry the username/password data. So its obvious that it will not work.
Try the default credentials.