ExtremeSwitching (ERS)
Questions and discussions about ERS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ERS 3600 no MAC learned/see on port

Hi all.I found some strange issue with ERS (Firmware 6.5.5.011) that dosen't see MAC on port after certain delay. I was alerted with Xerox Multifonction but see that with other endpoints.As there is no MAC on Eap port, Vlan is not set end device is o...

darvid by New Contributor II
  • 1216 Views
  • 4 replies
  • 0 kudos

SMLT on VSP7024XLS

Hello,I have two VSP7024XLS configured as IST. I'm trying to configure SMLT to distribute some servers (NIC Teaming) between the two, but it's not accepting the configuration no matter what. - I assigned SMLT ID to a port (Access).- I added the port ...

MWH by New Contributor
  • 1084 Views
  • 3 replies
  • 0 kudos

Resolved! EDM not available.

I have a 4950 ERS switch.  SSH is working.  When trying to connect via EDM I get an error occurred while connecting.  I am assuming the only fix is to reboot the switch.  Any other suggestions?

CSIMS75 by New Contributor
  • 2272 Views
  • 3 replies
  • 2 kudos

ERS4900 EDM Web Access/ CLI

All, I inherited a 2 stack of ERS4950 with an Avaya System.  I am trying to access the ERS by connecting to an ethernet port on one of the switches, but it does not allow me.  I cannot ping the switch nor even locate the IP address that's assigned to...

IT_Noob by New Contributor
  • 2670 Views
  • 2 replies
  • 1 kudos

Spanning tree disabled

Hii'm just new in Extreme and have hire in Extreme Enviroment , aftre check all availabe ERS switch in my orgnization i found Spanning tree is disbled in all ERS switches and this can cuase L2 loop , please i need ecommendation about this issue why i...

Kali-dragon-icon.svg.png
msyousef by New Contributor
  • 2362 Views
  • 5 replies
  • 0 kudos
GTM-P2G8KFN