10G XGM3 Module Port flapping on X460

[Mirco_Paternost]

Hello

Yesterday, we get an e-mail from Extreme Networks, that the 10G XGM3 Module has problem with the X460. The Port is flapping if the software is higher than 15.1. Has the Software Release 15.4.1.3 Patch 1-5 also this problem?

Thanks for the answer.
Kind regards

[PARTHIBAN_CHINN]

It applies to 10g ports including chassis based Switches bdx8 and bs 8k There must be a updated bulletin

[GCIT_Support]

Maybe 2 separate issues then??
Does the X670 have issues with 10Gb link flapping when running XOS v15.1.4 or earlier?
I am trying to figure out if I need to set debouce times to 150ms on the X670.
Can you tell me how to get the tech notes for these issues?

[Drew_C]

I'd like to clarify this a bit. There was an issue on X670, unrelated to the X460 issue this topic is covering. You may be thinking of xos0047059:

Port stuck in "down state" when adjacent switch connected to the x670-48x is rebooted.

This issue is resolved in EXOS 12.6.2, EXOS 15.1.2, and EXOS 15.2.1 (and greater).

[GCIT_Support]

Does this issue also apply to 10 Gb links on x670 switches without XGM3 module running 15.1.4 and earlier? Or does this just apply to 460s with XGM3 module?