ExtremeSwitching (EXOS/Switch Engine) - Page 69 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS to VOSS ISIS connection

Hi,Trying to find how to connect an EXOS switch to an existing Fabric core switch which has VOSS. Not clear what configuration to apply to EXOS to create SPBM 1 and enable ISIS on an interface to bring up an adjacency using standard B-VLANs 4051-4052...

Will the basic xsf script used with EXOS 22.7x work without issue on EXOS 3x.x?

I am in the process of deploying some new test bench switches X4460G2 and I had an issue with original script I had but it came from from EXOS 15 and it kept throwing script errors, the errors seemed more to do with the scripting then the actual EXOS...

Resolved! Connect a QSFP+ cable between a 5520-48W and a x770-32q

Hi,I am attempting to connect a 5520-48W to a x770-32q using a QSFP+ cable, but when it's connected, there's no link light and no sign of the link being up at either end. I believe I have enabled the right ports. On the 5520-48W, I am using one of ...

Resolved! Does the X435 support phyton scripting?

Hello,I have an X435 switch and try to run a phyton script according to https://extremeportal.force.com/ExtrArticleDetail?an=000079734&q=python%20script xxxx-SW1.8 # cat test.py print ("Script Start!") for number in range(1,11): print ("The numbe...

x435 mgmt interface going offline sporadically

Hello,We have an X435-24P-4S running Software Version: 31.2.1.1which was boarded via ExtremeCloud IQ and getting its IP address for the mgmt interface from a DHCP server.For no apparent reasons the mgmt interface goes offline for 8 hours, comes back,...

Top Kudoed Authors

User

Count

28

25

18

18

17

GTM-P2G8KFN