Hello!
I have to configure LLDP-MED in a 4220 and the command is not allowed by the CLI:
Enable lldp port all
configure lldp port all advertise vendor-specific med capabilities
configure lldp port all advertise vendor-specific med power-via-mdi
configure lldp port all advertise vendor-specific med policy application voice vlan voip dscp 46
configure lldp ports all advertise system-capabilities
Configure lldp port all advertise vendor-specific dot1 port-protocol-vlan-id vlan voip
configure lldp ports all advertise vendor-specific dot1 vlan-name vlan voip
I assume this is part of the limitations of the CLI in the 4220
Is it possible to configure LLDP-MED using SNMPv3 in the 4220?
If it is possible, is it possible to use a tool like SNMP mib browser, or generic snmpget/snmpset operations to perform this setup in the 4220?
If the answers to the previous questions are affirmative, are there parts of the 4220 configuration that are not available via SNMPv3?
Thanks in advance.
Salva
