802.1x authentication
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-29-2017 04:55 AM
Hi Team,
I need to configure the 802.1X authentication in Summit X440 -24p-10g switch.
I have NPS server in our environment .
Server details :- Ip address 192.168.1.74
Subnet :- 255.255.255.0
Gateway :- 192.168.1.1
Switch details :- Vlan 1 Ip address :- 192.168.1.4
Kindly provide setup by step command based on this Ip details .
In NPS already working and I configured so not required NPS document only I required what I need to configure in switch level with proper command.
I need to configure the 802.1X authentication in Summit X440 -24p-10g switch.
I have NPS server in our environment .
Server details :- Ip address 192.168.1.74
Subnet :- 255.255.255.0
Gateway :- 192.168.1.1
Switch details :- Vlan 1 Ip address :- 192.168.1.4
Kindly provide setup by step command based on this Ip details .
In NPS already working and I configured so not required NPS document only I required what I need to configure in switch level with proper command.
11 REPLIES 11
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-02-2018 12:42 PM
Is there any tutorial movie on this ? step by step for dummies ?
How to configure 802.1x based Netlogin with Radius on EXOS
How to configure 802.1x based Netlogin with Radius on EXOS
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-29-2017 05:28 AM
Muthu,
Regarding the "Error: Name lookup for host failed", you need to include the IP address of the RADIUS Server in the command line e.g. "primary server". Also, if you are using the default ports for RADIUS you do not need to include a port # (e.g. port 1812) in the command line.
Thanks.
Best regards,
Andrew
Regarding the "Error: Name lookup for host failed", you need to include the IP address of the RADIUS Server in the command line e.g. "primary server
Thanks.
Best regards,
Andrew
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-29-2017 05:22 AM
Muthu,
The "client-ip" refers to the local VLAN IP address (the source IP address for radius request from the switch)
Thanks.
Best regards,
Andrew
The "client-ip" refers to the local VLAN IP address (the source IP address for radius request from the switch)
Thanks.
Best regards,
Andrew
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-29-2017 05:21 AM
Hi Andrew,
Please find the error message.
X440-24p-10G.13 # configure radius netlogin primary server 1812 client-ip 192.168.1.4 vr "VR-Default"
Error: Name lookup for host failed
Regards
N.Muthus
Please find the error message.
X440-24p-10G.13 # configure radius netlogin primary server 1812 client-ip 192.168.1.4 vr "VR-Default"
Error: Name lookup for host failed
Regards
N.Muthus
