cancel
Showing results for 
Search instead for 
Did you mean: 

802.1x authentication

802.1x authentication

muthu_naganatha
New Contributor
Hi Team,

I need to configure the 802.1X authentication in Summit X440 -24p-10g switch.

I have NPS server in our environment .

Server details :- Ip address 192.168.1.74

Subnet :- 255.255.255.0

Gateway :- 192.168.1.1

Switch details :- Vlan 1 Ip address :- 192.168.1.4

Kindly provide setup by step command based on this Ip details .

In NPS already working and I configured so not required NPS document only I required what I need to configure in switch level with proper command.




11 REPLIES 11

hassephil
New Contributor
Is there any tutorial movie on this ? step by step for dummies ?
How to configure 802.1x based Netlogin with Radius on EXOS

Andrew_Imam
Extreme Employee
Muthu,

Regarding the "Error: Name lookup for host failed", you need to include the IP address of the RADIUS Server in the command line e.g. "primary server ". Also, if you are using the default ports for RADIUS you do not need to include a port # (e.g. port 1812) in the command line.
Thanks.

Best regards,
Andrew

Andrew_Imam
Extreme Employee
Muthu,

The "client-ip" refers to the local VLAN IP address (the source IP address for radius request from the switch)
Thanks.

Best regards,
Andrew

muthu_naganatha
New Contributor
Hi Andrew,

Please find the error message.
X440-24p-10G.13 # configure radius netlogin primary server 1812 client-ip 192.168.1.4 vr "VR-Default"
Error: Name lookup for host failed

Regards
N.Muthus
GTM-P2G8KFN